Red 70 Shore A Superior Silicone Gasket O Ring Seal For Oil And Gas
Product Details
A: Rubber O-ring seals - for binoculars, tools, automobiles, garage,
plumbers, machinery, plant, repair, air and
gas connected.
B: For professional pipe, sealing pipe and sewer repair leaks family,
bathtub, septic tanks, hydraulic, air and gas
connections, etc..
C: Oil, coolant, power steering fluid, washer fluid, Use for
mechanical,grease applications.
D: These rings are made of a very durable and pliable rubber
construction to seal contact and connection points.
They will last through long and arduous use.
E: O rings are also widely used by professional mechanics and DIY car
owners to fix engine leaks and other leaks
like oil, coolant, power steering fluid, washer fluid, etc. Use for
mechanical/grease applications.
Standard sizes for silicone o rings :
• AS 568 Standard Sizes:
• Cross Section:1.78mm/2.62mm/3.53mm/5.33mm/6.99mm
• JIS B 2401 Standard Sizes:
• P type Cross Section:1.9mm/2.4mm/3.5mm/5.7mm/8.4mm
• G type Cross Section:3.1mm/5.7mm
• V type Cross Section:4mm/6mm/10mm
• S type Cross Section:1.5mm/2mm
Silicone Rubber O-Rings (VMQ, PVMQ)
| Material | SIL(Silicone Rubber) |
| Advantage | 1,Excellent Rebound Resistance |
| 2,Excellent Oxygen and Ozone Resistance |
| 3,Excellent Weathering and Heat Resistance |
| 4,Excellent Heat and Low Temperature Resistance |
| 5,Good heat insulation and heat dissipation. |
| 6,Good electrical insulation |
| Disadvantage | 1,Poor Aliphatic-solvent Resistance |
| 2,Poor Alkaline Resistance |
| Temperature | -40℃-220℃, -100℃-250℃(special formula) |
| Application | 1,the household appliances industry seal or rubber parts, such as
electric kettle, electric irons, microwave oven rubber parts. |
| 2,The electronics industry seal or rubber parts, such as mobile
phone keys, shock pad DVD, cable joint seal etc. |
| 3,Contact with the human body on various types of products on the
seal, such as water bottles, water dispensers |
For Silicones the service temperatures are from -60 ℃ to 225 ℃.
Some special types can be used in extreme
temperatures up to 300 ℃ and down to -100 ℃.
Silicone rubber performs well under environmental and temperature
extremes. It is usually applied in automotive
and aerospace industries where flexibility and longevity are
important. It is also a suitable material for parts that
need food grade for food handling equipment and appliances.
Following elastomers can be use in O ring :
* Aflas® or Kalrez®(FFKM)
* Acrylate Rubber(ACM)
* Butyl Rubber(IIR)
* Ethylene-propylene (EPR, EPDM)
* Ethylene Acrylate Rubber(AEM)
* Fluorocarbon (FKM/FPM/FKM)
* Fluorosilicone(FVMQ)
* Hydrogenated Nitrile (HNBR)
* Neoprene Rubber(CR)
* Nitrile Rubber (Buna-N/NBR)
* Natural Rubber(NR)
* Polyurethane(PU)
* Silicone Rubber
* Styrene-butadiene Rubber (SBR)
Our Factory
Rui Chen Sealing Co., Ltd was built in 2006, now there are more
than 200 staff. The company has two branches
in Guangdong and Jiangxi, They are Dongguan Rui Chen Sealing Co.,
Ltd. and Shangrao Rui Chen Sealing Co., Ltd..
In recent years, the company has been supported by ShangRao
municipal government and fully enjoy all the
preferential policies for economic development zone. We will always
take "best quality, best service" as our
mission, and make progress together with you, harmony and mutual
win!
Certificates
1,
IATF16949
2.ISO9001
3.ISO14000
Progress
Cooperative partner
Ruichen company have cooperated with many superior customers as
below , we have complete system and excellent productivity
to serve for you
FAQ
Q: 1 What kinds of materials can you provide?
A: NBR, EPDM, SILICONE,FKM(FKM),NEOPRENE(CR), HNBR ,NR, IIR, SBR,
ACM, AEM,Fluorosilicone(FVMQ),
FFKM etc.
Q: 2 How to select the raw compound for my application?
A: With years of experience working with a variety of material, we
can help select the material that will best suit your
needs while keeping material costs in mind.
Q: 3 How long can we get the quote?
A: If your information is complete, we will provide the quotation
within 8 hours.
Q: 4 Can you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. Freight can be negotiated.
Q: 5 What is the normal lead time for product orders?
A: If the stock generally takes 3-7 days, mold about 15-18 days, no
mold about 25-30 days, depending on the product
situation.
Q: 6 How to check the quality of the bulk order?
A: We have incoming inspection, control the quality of raw
materials, process inspection,to ensure the quality of the
production process, shipping 100% of the full inspection; automatic
inspection machine full inspection, and according
to customer needs before the mass production of pre-production
samples.
Q: 7 What is your standard packing?
A: Plastic bag for inner packing .carton box for outer packing also
be packed according to customer's requirements.
Q: 8 What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or
L/C at sight, Paypal is also accepted.
- ng.
