ISO3601 FKM NBR O-Ring Factory Supply Abrasion-Resistance Black
Description of the sealing ring
Except silicone material ,we have many other rubber material .and
different material with different properties ,pls
refer to the below excel list :
| FKM product | Silicone product | NBR product | HNBR product | EPDM product | NR product | Peoprene product |
Abbreviation | FKM | silicone | NBR | HNBR | EPDM | Nature rubber | Neoprene |
Durometer(shoreA) | 60-90 | 30-90 | 20-95 | 50-90 | 30-90 | 20-90 | 20-95 |
Tensile(P.S.I) | 500-2000 | 200-1500 | 200-3000 | 2600 | 500-2500 | 500-3500 | 500-3000 |
Elongation(Max.%) | 300 | 700 | 600 | 530 | 600 | 700 | 600 |
Compression set | good | Good | Good | Excellent | Good | Excellent | Good |
Resilience-Rebound | Fair | Good | Good | Excellent | Good | Excellent | Excellent |
Abrasion Resistance | Good | Fair to poor | Excellent | Excellent | Good | Excellent | Excellent |
Tear Resistance | Good | poor | Good | Excellent | Fair | Excellent | Good |
Solvent Resistant | Excellent | poor | Good to excellent | Good | Poor | Poor | Fair |
Oil Resistant | Excellent | Fair to poor | Good to excellent | Excellent | Poor | Poor | Fair
|
ORK offers the seal industry's largest inventory of o-rings, which
includes every standard AS568 and ISO 3601 size, and the following:
- Inside Diameter from 0.031 in (0.794 mm) to 26.0 in (66.04cm)
- Outside Diameter from 0.094 in (2.38 mm) to 26.5 in (67.31cm)
- Cross Section from 0.031 in (0.794 mm) to 0.250 in (6.35mm)
In addition to standard imperial and metric sizes, ORK also carries
a wide variety of non-standard sizes. With over 8,000 different
o-ring sizes in-stock, we have exactly what you are looking for and
we can assure immediate delivery of any size in large or small
quantities.
O-Ring Sizing Guides
- AS568 Standard O-Ring Sizes
- ISO 3601 Standard Metric O-Ring Sizes
- All Standard and Non-Standard O-Ring Sizes
Still have questions about finding a standard or non-standard
o-ring size? Feel free to either contact us
Key Use(s): Oil resistant applications of all types. Low temperature military
uses. Off-road equipment. Automotive, marine, aircraft fuel
systems. Can be compounded for FDA applications.
Temperature Range:
Standard Compound: -30° to +120°F
Hardness (Shore A): 40 to 90.
Features: Comprised of the copolymer butadiene and acrylonitrile,
in varying proportions. Compounds can be formulated for service
temperature ranging from -85°F to +275°F. Use of Carboxylated
Nitrile can have superior abrasion resistance, while still having
improved oil resistance.
Limitations: Nitrile compounds are attached by small amounts of
Ozone. Phthalate type plasticizers are commonly used in compounding
Nitrile Rubber. These plasticizers can migrate out and cause
problems with certain plastics. Also, new regulations on certain
phthalates have limited their use.
Products Show:
Process Flow:
Raw material test → Prescribe → Mixing Material → Cutting Material
→ First Cure → First Part Inspection → Casual Inspection
→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post
Cure → FQC → Packing
Packing & Delivery:
Packing: PE bag inside, Carton outside.
Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm,
29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.
FAQ:
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao
City,
Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you
can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before
shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your
requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
