Black CR Abrasion-Resistance Neoprene O Seal Ring for Hose Seal

What is O Seal ring ?

1.The O-ring is an annular seal having an O-shaped cross section, the size of which is determined

by the inner diameter ID and the wire diameter CS.

2.O-ring size calculation: outer diameter = inner diameter + 2 x wire diameter (OD = ID + 2x CS).

3.The purpose of using O-ring seals is to prevent leakage and loss of liquids or gases.

4.O-rings are the most commonly used type of seal because of their simplicity, convenience, and

small installation space. As long as the groove design and material selection are correct, and the

operating conditions are within the temperature range of the rubber material, the seal can have a

long-term sealing effect in the static or dynamic seal.

The standard of O-rings mainly includes: national standard GB1235-76, national standard

GB3452.1-92; Japanese standard PTYPE, GTYPE, STYPE, SS/VTYPE, FTYPE; American standard

AS568, British standard series; European standard series

O-ring technical requirements include appearance requirements, dimensional requirements, and

material physical performance requirements.

Appearance requirements in line with GB/T3452.2-2007

Material requirements are in line with HG/T2579-2008

Dimensional requirements are in line with GB/T3452.1-2005

CR/Neoprene/Polychloroprene​ material

Neoprene or Polychloroprene is a group of synthetic rubbers which exhibit excellent chemical

constancy and maintain flexibility over a wide temperature range. Neoprene can be used in

a wide selection of applications, such as laptop sleeves, orthopedic braces, electrical insulation,

liquid, and sheet applied elastomeric membranes or flashings, and automotive fan belts. Its

chemical inertness makes it well suitable for industrial applications such as gaskets, hoses, and

corrosion-resistant coatings.

We can supply material NBR, EPDM, SILICONE,FKM(FKM),NEOPRENE(CR), HNBR ,NR, IIR, SBR, ACM,

AEM,Fluorosilicone(FVMQ),FFKM etc.The below table is the property of material , you can choose as your

requirements :

The tolerence for rubber products as below :

Our Factory

Rui Chen Sealing Co., Ltd was built in 2006, now there are more than 200 staff. The company has two branches

in Guangdong and Jiangxi, They are Dongguan Rui Chen Sealing Co., Ltd. and Shangrao Rui Chen Sealing Co., Ltd..

In recent years, the company has been supported by ShangRao municipal government and fully enjoy all the

preferential policies for economic development zone. We will always take "best quality, best service" as our

mission, and make progress together with you, harmony and mutual win!

Certificates

1, IATF16949

2.ISO9001

3.ISO14000

Progress

FAQ

Q: 1 What kinds of materials can you provide?
A: NBR, EPDM, SILICONE,FKM(FKM),NEOPRENE(CR), HNBR ,NR, IIR, SBR, ACM, AEM,Fluorosilicone(FVMQ),

FFKM etc.

Q: 2 How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your

needs while keeping material costs in mind.

Q: 3 How long can we get the quote?
A: If your information is complete, we will provide the quotation within 8 hours.

Q: 4 Can you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. Freight can be negotiated.

Q: 5 What is the normal lead time for product orders?
A: If the stock generally takes 3-7 days, mold about 15-18 days, no mold about 25-30 days, depending on the product

situation.

Q: 6 How to check the quality of the bulk order?
A: We have incoming inspection, control the quality of raw materials, process inspection,to ensure the quality of the

production process, shipping 100% of the full inspection; automatic inspection machine full inspection, and according

to customer needs before the mass production of pre-production samples.

Q: 7 What is your standard packing?
A: Plastic bag for inner packing .carton box for outer packing also be packed according to customer's requirements.

Q: 8 What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or L/C at sight, Paypal is also accepted.

DONGGUAN RUICHEN SEALING CO., LTD

SHANGRAO RUICHEN SEALING CO.,LTD

      Ruichen Sealing Co., Ltd was built in 2006, The company has two branches in Dongguan and Shangrao.They are Dongguan Ruichen Sealing  Co., Ltd. and Shangrao Ruichen Sealing Co., Ltd.. We mainly produce rubber o rings , gaskets , ball , grommet and customized rubber part. Shangrao Ruichen as production base , covering a total area of 18,000 square meters, with total assets of 100 million yuan, more than 300 employees and 46 sets of plate vulcanizer machines.

Ruichen focus on research and production of rubber seals. At present, we have more than 10,000 sets of molds for O-ring and other seal rings. O-ring sizes include American standard (AS568), Japanese standard (JIS) and GB series. The material meets the requirements of various environmental regulations (ROHS2.0 REACH224 FDA, PAHS, WRC, WARS, VOC, UL), etc. Products are widely used in automotive parts, connectors, electronic products, pumps and valves, pneumatic, power tools, medical instruments and other fields.

Ruichen use ISO9001, IATF16949, ERP, HRP systems to establish and improve the quality management, process management, labor cost control. Ruichen adhering to the "love management, fuhui sustainable (carry forward good moral character, create good quality)" concept, aim to seal industry deep cultivation for a hundred years, to be O-RING KING!