Black Good Water Resistance Duro 80 SBR Seal Styrene Butadiene Rubber Oring

SBR material

SBR Rubber Features:

1.Main materials: Styrene-butadiene rubber (SBR), a general-purpose synthetic rubber,

produced from a copolymer of styrene and butadiene. Exceeding all other synthetic rubbers

in consumption, SBR is used in great quantities in automobile and truck tires, generally

as an abrasion-resistant replacement for natural rubber (produced from polyisoprene).

2.Available place: They are widely used in automobile, electrical appliances, building vibration

isolation and other industry. For example, air blower, water pump, instrument, measuring

of ships and so on.

3.Main performance: SBR has similar chemical and physical properties to natural rubber,

with generally better abrasion resistance,outstanding strength,good creep and stress relaxation

resistance and low cost,etc. It is not recommended to use SBR in applications that involve ozone,

strong acids, oils, greases, fats and most hydrocarbons.

1.The O-ring is an annular seal having an O-shaped cross section, the size of which is determined

by the inner diameter ID and the wire diameter CS.

2.O-ring size calculation: outer diameter = inner diameter + 2 x wire diameter (OD = ID + 2x CS).

3.The purpose of using O-ring seals is to prevent leakage and loss of liquids or gases.

4.O-rings are the most commonly used type of seal because of their simplicity, convenience, and

small installation space. As long as the groove design and material selection are correct, and the

operating conditions are within the temperature range of the rubber material, the seal can have a

long-term sealing effect in the static or dynamic seal.

Following elastomers can be use in O ring :
* Aflas® or Kalrez®(FFKM)
* Acrylate Rubber(ACM)
* Butyl Rubber(IIR)
* Ethylene-propylene (EPR, EPDM)
* Ethylene Acrylate Rubber(AEM)
* Fluorocarbon (FKM/FPM/FKM)
* Fluorosilicone(FVMQ)
* Hydrogenated Nitrile (HNBR)
* Neoprene Rubber(CR)
* Nitrile Rubber (Buna-N/NBR)
* Natural Rubber(NR)
* Polyurethane(PU)
* Silicone Rubber
* Styrene-butadiene Rubber (SBR)

Our Factory

Rui Chen Sealing Co., Ltd was built in 2006, now there are more than 200 staff. The company has two branches

in Guangdong and Jiangxi, They are Dongguan Rui Chen Sealing Co., Ltd. and Shangrao Rui Chen Sealing Co., Ltd..

In recent years, the company has been supported by ShangRao municipal government and fully enjoy all the

preferential policies for economic development zone. We will always take "best quality, best service" as our

mission, and make progress together with you, harmony and mutual win!

Certificates

1, IATF16949

2.ISO9001

3.ISO14000

Progress

FAQ

Q: 1 What kinds of materials can you provide?
A: NBR, EPDM, SILICONE,FKM(FKM),NEOPRENE(CR), HNBR ,NR, IIR, SBR, ACM, AEM,Fluorosilicone(FVMQ),

FFKM etc.

Q: 2 How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your

needs while keeping material costs in mind.

Q: 3 How long can we get the quote?
A: If your information is complete, we will provide the quotation within 8 hours.

Q: 4 Can you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. Freight can be negotiated.

Q: 5 What is the normal lead time for product orders?
A: If the stock generally takes 3-7 days, mold about 15-18 days, no mold about 25-30 days, depending on the product

situation.

Q: 6 How to check the quality of the bulk order?
A: We have incoming inspection, control the quality of raw materials, process inspection,to ensure the quality of the

production process, shipping 100% of the full inspection; automatic inspection machine full inspection, and according

to customer needs before the mass production of pre-production samples.

Q: 7 What is your standard packing?
A: Plastic bag for inner packing .carton box for outer packing also be packed according to customer's requirements.

Q: 8 What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or L/C at sight, Paypal is also accepted.

DONGGUAN RUICHEN SEALING CO., LTD

SHANGRAO RUICHEN SEALING CO.,LTD

      Ruichen Sealing Co., Ltd was built in 2006, The company has two branches in Dongguan and Shangrao.They are Dongguan Ruichen Sealing  Co., Ltd. and Shangrao Ruichen Sealing Co., Ltd.. We mainly produce rubber o rings , gaskets , ball , grommet and customized rubber part. Shangrao Ruichen as production base , covering a total area of 18,000 square meters, with total assets of 100 million yuan, more than 300 employees and 46 sets of plate vulcanizer machines.

Ruichen focus on research and production of rubber seals. At present, we have more than 10,000 sets of molds for O-ring and other seal rings. O-ring sizes include American standard (AS568), Japanese standard (JIS) and GB series. The material meets the requirements of various environmental regulations (ROHS2.0 REACH224 FDA, PAHS, WRC, WARS, VOC, UL), etc. Products are widely used in automotive parts, connectors, electronic products, pumps and valves, pneumatic, power tools, medical instruments and other fields.

Ruichen use ISO9001, IATF16949, ERP, HRP systems to establish and improve the quality management, process management, labor cost control. Ruichen adhering to the "love management, fuhui sustainable (carry forward good moral character, create good quality)" concept, aim to seal industry deep cultivation for a hundred years, to be O-RING KING!