FDA Colored Silicone O Rings Encapsulated , Industrial O Rings High Flexibility

Silicone / VMQ: The silicones are a group of elastomeric materials made from silicone, oxygen, hydrogen and carbon. As a group, the silicones have poor tensile strength, tear resistance and abrasion resistance. Special compounds have beer made which have exceptional heat and compression set resistance. High strength compounds have also been developed but their strength does not compare to conventional rubber. Silicones possess excellent resistance to temperature extremes, Flexibility below - 175 degrees F (- 114 degrees C) has been demonstrated. The maximum temperature at which silicones are recommended for continuous service in dry air is 450 degrees F (232 degrees C). Silicone's retention of properties at these high temperatures is superior to other elastic materials, Silicone compounds are not normally recommended for dynamic sealing applications due to relatively low strength and high coefficient of friction. Many silicone compounds have a higher than normal mold shrinkage that results in finished parts being under mold shrinkage when produced in standard molds.

Trade Names:

• Elastosil . . . Wacker
• Silastic . . . Dow Corning
• Silplus . . . Momentive Performance Materials

ASTM D1418 Designation: MQ, PMQ, VMQ, PVMQ

ASTM D2000/SAE J200 Type, Class: FC, FE, GE

Apple Compound Designation: SL

Standard Color: Red,blue,yellow,black,white

Key Use(s): Static seals in extreme temperature situations. Seals for medical devices, compatible with FDA regulations.

Temperature Range:
Standard Compound: -40° to +220°C

Hardness (Shore A): 10 to 85

Features: Phenyl (PVMQ) based silicones can perform to -40°C. New polymers can take short term to 220°C.

Limitations: Generally, low abrasion and tear resistance, and high friction characteristics preclude silicones from effectively sealing some dynamic applications. Silicones are also highly permeable to gases and are generally not recommended for exposure to ketones (MEK,acetone) or concentrated acids.

70 TEST REPORT

Test Requested:As specified by clients,to determine total extractive residues from Rubber articles intended for repeated use in contact with food for compliance with Food and Drug Administration Regulations.

Test Method: With reference to US FDA 21 CFR 177.2600.

DONGGUAN RUICHEN SEALING CO., LTD

SHANGRAO RUICHEN SEALING CO.,LTD

      Ruichen Sealing Co., Ltd was built in 2006, The company has two branches in Dongguan and Shangrao.They are Dongguan Ruichen Sealing  Co., Ltd. and Shangrao Ruichen Sealing Co., Ltd.. We mainly produce rubber o rings , gaskets , ball , grommet and customized rubber part. Shangrao Ruichen as production base , covering a total area of 18,000 square meters, with total assets of 100 million yuan, more than 300 employees and 46 sets of plate vulcanizer machines.

Ruichen focus on research and production of rubber seals. At present, we have more than 10,000 sets of molds for O-ring and other seal rings. O-ring sizes include American standard (AS568), Japanese standard (JIS) and GB series. The material meets the requirements of various environmental regulations (ROHS2.0 REACH224 FDA, PAHS, WRC, WARS, VOC, UL), etc. Products are widely used in automotive parts, connectors, electronic products, pumps and valves, pneumatic, power tools, medical instruments and other fields.

Ruichen use ISO9001, IATF16949, ERP, HRP systems to establish and improve the quality management, process management, labor cost control. Ruichen adhering to the "love management, fuhui sustainable (carry forward good moral character, create good quality)" concept, aim to seal industry deep cultivation for a hundred years, to be O-RING KING!